The correct way to use paint

1. Any pigment or paint that is viscous needs to be diluted before use, and there are no particles in the paint that may clog the spray gun.
2. If the paint is too thick, please use water or thinner to thin it. Or it may clog the airbrush.
3. When finishing the spraying work or have to stop for more than 10 minutes, please use the cleaning brush to clean the airbrush cavity, nozzle, and fluid cup thoroughly in time, Can effectively avoid blockage.
4. Pigments and liquids that can be used
5. Airbrush Paint、Leather Paint 、Acrylic Paint 、Watercolors 、Inks、Oil Paint、Enamel Paint 、Nail polish、Toner (Please make different dilutions according to the viscosity of the liquid, otherwise it will cause the paint to clog and the Airbrush cannot be used normally）
6. Facial toner、Makeup Pigments (If your airbrush has been used for anything other than makeup, skin care, do not use it on any skin).
7. Food Coloring( If your airbrush has ever been used for anything other than food grade dyes, do not use it for anything edible.)
8. Note: Some pigments used on models or metals will cause graininess or paint peeling, please use the pigments correctly.

Precautions for use

1. When the compressor is turned on, there will be air flow out but no liquid will be sprayed out. This is the pre-working state of the airbrush and is a normal phenomenon. It is necessary to rotate the fluid control knob at the end of the airbrush and pull the trigger on the upper part of the airbrush to spray the liquid normally.
2. Please test the airbrush with water before use to make sure the airbrush is not clogged. If the airbrush can’t spray liquid, it may be because the fluid control knob is too tight or the nozzle is blocked. Please try to adjust the fluid control knob or clean the nozzle with alcohol or detergent.
3. Please do not use the airbrush when charging. When finishing the spraying work or have to stop for more than 10 minutes, please use the cleaning brush to clean the airbrush cavity, nozzle, and fluid cup thoroughly in time, Can effectively avoid blockage.
4. Don’t soak your airbrush. Even though it might sound like a simple cleaning solution, doing so will actually damage the more sensitive parts of the tool.
5. Please use pigments and liquids correctly. For example, don’t use oily foundation. You need to use a special foundation for the airbrush, otherwise the nozzle will be blocked.
6. Please use water-based makeup foundations instead of oil-based makeup foundations, you need to use makeup foundations made for airbrushes otherwise it will clog the nozzle.
7. After 30 minutes of continuous use, the air compressor should be turned off for a few minutes to cool down.

Airbrush Cleaning Steps

1. Add water, alcohol or cleaning fluid to the fluid cup and spray it.
2. Try back flushing. Cover the nozzle with finger or a paper towel and press down slightly on the trigger. This helps clean the narrow chamber around the needle.
3. Use a brush to clean the inner wall of the container to ensure that there is no paint residue, and at the same time clean the inner wall of the spray gun to prevent residue from clogging.

Purpose of the Airbrush Kit

• An Airbrush is an air-operated tool that sprays various media. You can use the Airbrush to create a wide variety of artistic works on nails, models, cake, food, toy, T-shirts, backpack, canvas and a multitude of other surfaces.
• It can also be used for makeup and beauty. (If your airbrush has been used for anything other than makeup, skin care, do not use it on any skin)